Canon imageCLASS MF4270 Reference Manual page 196

Before Using the
Machine 1
MEMORY FULL
Document and Paper
Description
2
Action
Copying
3
Action
Sending and
Receiving 4
Action
Printing and
Description
Scanning
5
Action
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
The machine is full of jobs.
Print, send, or delete any documents stored in
memory.
Divide the document stack or data into a few
parts and try again one by one.
Send the document with low resolution.
The number of TX/RX jobs that can be stored in
memory reached the maximum.
The machine memory can store up to 256 fax
jobs including sending and receiving jobs. (Based
on the condition that the other party sends
the fax by the imageCLASS MF4270 with ITU-T
Standard Chart No.1, standard mode.)
Wait for the machine to send any faxes in
memory. Also print or delete any documents in
memory.
Back
NOT AVAILABLE
Description You pressed the one-touch speed dialing key
that has already been registered, when you are
registering group dialing.
Description You selected the group dialing that has already
been registered, when you are registering a one-
touch speed dialing key.
Action Register the one-touch speed dialing key that is
not used.
NOT REGISTERED
Description No recipient is registered for the one-touch
speed dialing key or coded speed dialing code
you pressed.
Action Register the recipients before using the Address
Book function.
OUT OF TONER
CHANGE TONER
Description The toner ran out completely.
Action Replace the toner cartridge.
TOP
Previous Next
10-17