Canon imageCLASS MF4270 Reference Manual page 85

Before Using the
Machine 1
Fax Dialing Features
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Switching Temporarily to Tone Dialing
■
If your machine is set for pulse dialing, use the procedure below to
switch to tone dialing to use information services (e.g., banks, airline
reservations, and hotel reservations).
To talk to the other party, you will need to connect an external telephone
to the machine.
1.
Press [FAX].
2.
Press [Hook].
Make sure to confirm the dial tone before entering a fax number. If
you enter the number before the dial tone can be heard, the call may
not be connected, or the wrong number may be dialed.
Back Previous
3.
Use the numeric keys to dial the required
information service.
4.
When the recorded message of the information
service answers, press [ Tone] to switch to tone
dialing.
5.
Use the numeric keys to enter the numbers
requested by the information service.
6.
If you want to receive faxes, press [Start].
If you are using the external telephone, hang up the handset after
pressing [Start].
TOP
Next
4-19