Canon imageCLASS MF4270 Reference Manual page 89

Before Using the
Machine 1
Basic Receiving Method
Document and Paper
2
Copying
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Follow this procedure to set the machine for receiving faxes.
The default setting is <FaxOnly>.
Any data stored in the memory, including received fax documents, will be
deleted if you turn off the main power switch of the machine.
1.
Press [Additional Functions].
2.
Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3.
Press [ ] or [ ] to select <RX MODE>, then
press [OK].
Back Previous
4.
Press [ ] or [ ] to select the receive mode,
then press [OK].
< FaxOnly>: Answers all calls as faxes.
< AnsMode>: Receives faxes automatically and records voice
messages.
<DRPD> (Distinctive Ring Pattern Detection): Distinguishes between
fax and voice calls using distinctive ring patterns. Select the ring
pattern assigned by your telephone company. For optional settings,
see "DRPD: Optional Settings, " on p. 4-25.
<FAX/TEL>: Switches between fax and voice calls automatically if
an external telephone is connected to the machine. For optional
settings, see "FAX/TEL: Optional Settings, " on p. 4-24.
<MANUAL>: Does not answer any calls. You have to manually receive
faxes. See "Manual Reception, " on p. 4-25.
- For <FAX/TEL> or <MANUAL>, make sure an external telephone
is connected to the machine.
- For <AnsMode>, make sure an external telephone with built in
answering machine is connected to the machine.
- For <DRPD>, subscription to a DRPD service is required. Contact
your telephone company for availability.
5.
Press [Stop/Reset] to return to the standby
mode.
TOP
Next
4-23