General Problems - Canon imageCLASS MF4270 Reference Manual

Before Using the
Machine 1

General Problems

Document and Paper
2
Copying
The machine has no power.
3
Sending and
Receiving 4
Printing and
Scanning
5
Network
6
Remote UI
7
System Manager
Settings
8
Maintenance
9
Troubleshooting
10
Appendix
11
Table of Contents
Index
Q Is the power cord plugged in securely?
A Check that the power cord is securely plugged into
the machine and into the wall outlet. If the machine is
plugged into a power strip, make sure the power strip
is plugged in and turned on.
Q Is the power cord supplying power?
A Use a different power cord, or test the cord for
continuity using a voltmeter.
Q Is the main power switch turned on?
A Turn on the main power switch.
Back
The Error indicator flashes.
Q Does the machine feed paper correctly, or is there
paper in the paper cassette or multi-purpose tray?
A Clear the paper jam, or load paper in the paper
cassette or multi-purpose tray. (For instructions on
clearing paper jam, see "Clearing Jams, " on p. 10-3.
For instructions on loading paper, see "Set Up the
Machine, " in the Starter Guide.)
A If the machine has no paper jam, or paper is loaded
in the paper cassette or multi-purpose tray, turn off
the main power switch and wait for more than 10
seconds, then turn it on again. If the problem is fixed,
the Error indicator will turn off, and the LCD will return
to the standby mode. If the Error indicator remains
flashing, unplug the machine, and contact Canon
Authorized Service Facilities or the Canon Customer
Care Center.
TOP
Previous Next
10-24