No Signal Screen; Screen When Blank - Canon WUX6000 User Manual

No Signal Screen

> [System settings] > [User screen
settings] >
HDMI
Digital PC
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Black The screen is all black.
Blue The screen is all blue.
User logo The user logo is projected.
Press the OK button to accept your
setting and then press the MENU
button.
• [Blue] is the factory default.
Downloaded from ProjectorsManual.com Manuals
Customizing System Operation (System Settings)
[No signal screen]
Component LAN
Analog PC USB

Screen When Blank

> [System settings] > [User screen
[Screen when blank]
settings] >
HDMI
Digital PC
You can project a black, blue, or
registered user screen to blank out
projection temporarily by pressing
the BLANK button on the remote
control.
Black The screen is all black.
Blue The screen is all blue.
User logo The user logo is projected.
Press the OK button to accept your
setting and then press the MENU
button.
• [Black] is the factory default.
97
Component LAN
Analog PC USB