No Signal Screen; Screen When Blank - Canon WUX450 User Manual

No Signal Screen

> [System settings] > [User screen
[No signal screen]
settings] >
HDMI Component
Digital PC Analog PC
As the image projected when there is
no input signal, you can choose a
black, blue, or registered user
screen.
Black The screen is all black.
Blue The screen is all blue.
User logo The user logo is projected.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Blue] is the factory default.
Customizing System Operation (System Settings)

Screen When Blank

LAN
USB
You can project a black, blue, or
registered user screen to blank out
projection temporarily by pressing
the BLANK button on the remote
control.
Black
Blue
User logo
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Black] is the factory default.
109
> [System settings] > [User screen
[Screen when blank]
settings] >
HDMI Component
Digital PC Analog PC
The screen is all black.
The screen is all blue.
The user logo is projected.
LAN
USB