Steps for Setting Up the Projector and Projecting an Image
Connecting the Projector to Equipment (P34)
Turning on the Power (P42)
Do you want to project an image
from a notebook computer?
No
Performing the Auto Setup (P45)
Image projected properly?
No
Selecting an Input Signal (P47)
Image projected properly?
No
Adjusting the Image (P49)
Do the following adjustments.
• Setting the Display Resolution of the Computer (P49)
• Adjusting misaligned images or flickering of the
screen using the Auto PC (P50)
• Adjusting the Image Size (P51)
• Adjusting the Focus (P52)
• Adjusting keystone Distortion (P53)
Making Fine Adjustments
• Selecting an Aspect Ratio of Projected Image (Screen
aspect) and a Screen Mode (Aspect) (P55, P59)
• Selecting an Image Mode (P61)
For a notebook computer, turn on
Yes
the monitor output (P44) and then
go to Auto Setup.
Yes
Projection is complete.
Yes
Projection is complete.
30