Error List - Canon WUX6000 User Manual

Resetting Network Settings to the Default Settings
1
Perform steps 1 - 3 on "Displaying the Network Configuration Screen"
(P177) to display the settings screen.
2
Click [Initialize].
3
A confirmation window appears. Click [OK].
■ Error Notification Mails
The messages shown in the following error list are sent when an error occurs in the
projector.

Error list

Errors related to
temperature
Errors related to
the lamp
Errors related to
the fan
Errors related to
the air filter
Downloaded From projector-manual.com Canon Manuals
Error name Temperature abnormality
Text The temperature inside the projector is too high for some
reason or the outside air temperature is higher than the
specified one.
If the problem is inside the projector, check whether the
projector is installed and operated normally, turn off the
projector to cool its inside, and retry projection. If the same
warning occurs again, the projector may be defective.
Contact your dealer.
Error name Faulty lamp
Text The lamp has burnt out. Replace the lamp with a new one.
If the same warning occurs again, the lamp drive circuit
may be defective. Contact your dealer.
Error name Faulty cooling fan
Text The cooling fan or another component may be defective.
Contact your dealer.
Error name Faulty air filter unit
Text The air filter unit is not installed properly.
Check whether the air filter unit is installed properly.
If it is installed properly, the air filter unit detection switch
may be defective. Contact your dealer.
Completing Computer Settings
189