Table of Contents
Advertisement
Setting the presentation timer
The presentation timer can indicate the presentation time on the screen to help you achieve better time
management when giving presentations. Follow these steps to utilize this function:
1.
Go to the SYSTEM SETUP: Basic > Presentation Timer menu and press OK/IMAGE to display
the Presentation Timer page.
2.
Press
to highlight Preset Time and decide the timer period by pressing
can be set from 1 to 5 minutes in 1-minute increments and 5 to 240 minutes in 5-minute increments.
If the timer is already on, the timer will restart whenever the Preset Time is reset.
3.
Press
to highlight Timer Display and choose if you want the timer to show up on the screen by
pressing
Selection
Always
1 min/2 min/3 min
Never
4.
Press
to highlight Position and set the timer position by pressing
be chosen from the upper-left, lower-left, upper-right to the lower-right corner of the screen.
5.
Press
to highlight Counting Direction and select your desired counting direction by pressing
.
Selection
Count Up
Count Down
6.
Press
to highlight Sound Reminder and decide if you want to activate sound reminder by
pressing
down/up, and a triple beep sound will be produced when the timer is up.
7.
To activate the presentation timer, press
8.
A confirmation message is displayed. Highlight Yes and press OK/IMAGE to confirm. You will see
the message "Timer is On!" appearing on the screen. The timer starts counting once the timer is
turned on.
If you switch input signal or press AUTO PC when the timer is on, the timer will be stopped.
To cancel the timer, perform the following steps.
1.
Go back to the Presentation Timer page.
2.
Press
and press
displayed.
3.
Highlight Yes and press OK/IMAGE to confirm. You will see the message "Timer is Off!"
appearing on the screen.
Using the TIMER key
TIMER is a multi-functional key.
•
If the presentation timer is off, pressing this key displays a
confirmation message. You can decide whether to activate the timer
or not by following the on-screen instruction.
•
If the timer is already on, pressing this key displays a confirmation
message. You can decide whether to restart, continue or turn off the
timer by following the on-screen instruction.
42
/
.
Description
Displays the timer on screen throughout the presentation time.
Displays the timer on screen in the last 1/2/3 minute(s).
Hides the timer throughout the presentation time.
Description
Increases from 1 to the preset time.
Decrease from the preset time to 1.
/ . If you select On, a double beep sound will be heard at the last 30 seconds of counting
/
to highlight Off and press OK/IMAGE. A confirmation message is
and press
/
to select On and press OK/IMAGE.
/
. The length of time
/
.The reminder position can
/
Advertisement
Table of Contents
