Customizing System Operation (System Settings)
Selecting a Logo at
Startup
> [System settings] > [User screen
[Projector on]
settings] >
HDMI
Component
Digital PC
Analog PC
You can display a specified logo on
the screen from the moment the
projector is turned on to the moment
it is ready for projection.
Skip
Projects an input signal
immediately after turning on
the projector.
Canon
Displays the Canon logo that
logo
was registered in advance at
the factory.
User logo
The user logo is projected.
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [Canon logo] is the factory default.
• Only images with an aspect of 16:10 can be
registered as user logos.
Specifying Auto
Power-Off
> [System settings] >
off]
LAN
HDMI
USB
Digital PC
You can turn off the lamp or
projector automatically in order to
save power when the projector is not
in use.
5 min.–
60 min.
Disabled
Press the OK button to accept your
setting and then press the MENU
button or EXIT button.
• [15 min.] is the factory default.
• You cannot enable the [Direct power on]
function (see the next item), if you select
[Disabled].
108
[Auto power-
Component
Analog PC
If the selected time elapses
without any input signal, the
projector displays the
countdown of the time until the
projector will be turned off.
Disable auto power-off.
LAN
USB