Sanremo You Instruction Booklet page 55

General rules and warnings
- CHECK THAT ALL SAFETY
DEVICES (GUARDS, CASES,
MICROSWITCHES, ETC.) HAVE
NOT BEEN TAMPERED WITH
AND ARE PERFECTLY OPERATING.
OTHERWISE, SERVICE THEM.
- DO NOT REMOVE SAFETY DEVICES.
- TO AVOID PERSONAL RISKS,
ONLY USE SUITABLE TOOLS
COMPLIANT WITH NATIONAL
SAFETY STANDARDS.
- PAY UTMOST ATTENTION TO
THE WARNING LABELS ON THE
MACHINE EVERY TIME YOU
OPERATE ON OR NEAR IT.
- THE CONNECTION OF THE
MACHINE TO THE WATER SUPPLY
NETWORK MUST BE MADE
ACCORDING TO THE DIRECTIVES
AND LAWS IN FORCE IN THE
COUNTRY OF INSTALLATION.
- FURTHERMORE, THE USER MUST
REPLACE ALL WARNING LABELS
THAT ARE WORN OR NOT
CLEARLY READABLE FOR ANY
REASON, REQUESTING SPARE
ONES FROM THE SPARE PARTS
SERVICE.
- IF THE MACHINE IS
MALFUNCTIONING OR
COMPONENTS ARE DAMAGED,
CONTACT THE LOCAL DEALERSHIP
OR THE MANUFACTURER.
- IT IS STRICTLY FORBIDDEN TO USE
THE MACHINE FOR A PURPOSE
OTHER THAN THE EXPECTED AND
DOCUMENTED PURPOSE. USE
OF THE MACHINE MUST ALWAYS
TAKE PLACE WITH THE METHODS,
TIMING AND LOCATION SET OUT
BY GOOD TECHNICAL PRACTICE,
IN ACCORDANCE WITH CURRENT
REGULATIONS AND COMPLYING
WITH WORKPLACE HEALTH AND
SAFETY STANDARDS AS SET OUT
BY THE CURRENT LAWS OF THE
COUNTRY WHERE THE MACHINE
IS USED.
- THE MACHINE IS SUPPLIED WITH:
FILTER HOLDERS, FILTERS, PRESSER,
BRUSH, CLOTH, DRAIN AND INLET
PIPES, CLAMP AND USE BOOKLET.
- IF THE MACHINE IS EXPOSED
TO TEMPERATURES BELOW
+0°C, PROCEED AS FOLLOWS:
MAKE SURE THAT THE MACHINE
HAS BEEN STORED FOR 24
HOURS IN A PLACE WHERE THE
TEMPERATURE IS ABOVE +15°C
BEFORE SWITCHING ON.
- AFTER INSTALLATION, THE
HIGHEST POINT OF THE MACHINE
MUST BE AT LEAST 1.5 METRES
ABOVE THE FLOOR.
55
YOU