Cleaning The Print Head Deeply - Canon MG2100 Series On-Screen Manual

Cleaning the Print Head Deeply

>
Home Overview of the Machine
Cleaning the Print Head Deeply
C101
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the print head, clean the print head deeply.
Cleaning the print head deeply consumes more ink than the standard cleaning of the print head, so
clean the print head deeply only when necessary.
1.
Make sure that the power is turned on.
2.
Clean the print head deeply.
(Maintenance) button repeatedly until
(1) Press the
Press the Color or Black button.
(2)
The machine starts cleaning the print head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the print
head. This takes about 1 to 2 minutes.
3.
Check the print head condition.
When the deep cleaning is complete, the LED (Light Emitting Diode) returns to the copy standby
mode.
To check the print head condition, print the nozzle check pattern.
Printing the Nozzle Check Pattern
If the problem is not resolved, turn off the power and clean the print head deeply again after 24 hours.
If the problem is still not resolved, replace the FINE cartridge with a new one.
Replacing a FINE Cartridge
If the problem is still not resolved after replacing the FINE cartridge, contact the service center.
This manual downloaded from http://www.manualowl.com
> >
Maintenance When Printing Becomes Faint or Colors Are Incorrect
y is displayed.
Page top
Page 664 of 731 pages
>