Canon MG2100 Series On-Screen Manual page 446

Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
8.
Click Scan.
Scanning Multiple Documents in Whole Image View
Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan
multiple documents as a single image.
Note
Positions of slanted documents are not corrected in whole image view.
1.
After previewing images, click
Switch to whole image view.
Note
When the whole image is displayed, the icon changes to
2.
Set Destination.
3.
Set Output Size.
Invert aspect ratio will be enabled when Output Size is set to anything but Flexible. Click this button
to rotate the cropping frame. Click again to return it to the original orientation.
4.
Adjust the cropping frames.
Adjust the size and position of the cropping frames on the preview image. You can also create two
or more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area
is specified, only the portion in the specified area will be scanned.
Adjusting Cropping Frames
5.
Set Image corrections as required.
This manual downloaded from http://www.manualowl.com
(Thumbnail) on the Toolbar.
(Whole Image).
Page 446 of 731 pages