Cleaning The Print Head - Canon MG2100 Series On-Screen Manual

Cleaning the Print Head

>
Home Overview of the Machine
Cleaning the Print Head
C100
Cleaning the Print Head
Clean the print head if lines are missing or if horizontal white streaks are present in the printed nozzle
check pattern. Cleaning unclogs the nozzles and restores the print head condition. Cleaning the print
head consumes ink, so clean the print head only when necessary.
1.
Make sure that the power is turned on.
2.
Clean the print head.
(Maintenance) button repeatedly until
(1) Press the
Press the Color or Black button.
(2)
The machine starts cleaning the print head.
Do not perform any other operations until the machine completes the cleaning of the print head.
This takes about 1 to 2 minutes.
3.
Check the print head condition.
When the cleaning is complete, the LED (Light Emitting Diode) returns to the copy standby mode.
To check the print head condition, print the nozzle check pattern.
Printing the Nozzle Check Pattern
Note
If the problem is not resolved after cleaning the print head twice, clean the print head deeply.
Cleaning the Print Head Deeply
This manual downloaded from http://www.manualowl.com
> >
Maintenance When Printing Becomes Faint or Colors Are Incorrect
H is displayed.
Page top
Page 663 of 731 pages
>