Canon MG2100 Series On-Screen Manual page 67

Using the Blemish Remover Function
Note
Move the cursor over the image. The shape of the cursor changes to
5.
Drag to select the area you want to enhance, then click OK that appears over the
image.
Moles in and around the selected area are reduced and the
appears on the upper left of the image.
Note
(Compare) to display the images before and after the enhancement side by side so
Click
that you can compare and check the result.
Click Undo to undo the preceding enhancement operation.
6.
Click Save Selected Image or Save All Corrected Images.
You can save enhanced images as new files.
Note
To save only the image you like, click Save Selected Image. To save all images, click Save All
Corrected Images.
Only JPEG/Exif data format is available for enhanced images.
7.
Click Exit.
Important
The enhancements will be lost if you exit before saving enhanced images.
This manual downloaded from http://www.manualowl.com
(Cross).
(Correction/Enhancement) mark
Page top
Page 67 of 731 pages