Managing The Machine Power - Canon MG2100 Series On-Screen Manual

Managing the Machine Power

>
Home Overview of the Machine
Your Computer > Managing the Machine Power
P414
Managing the Machine Power
This function allows you to manage the machine power from the printer driver.
The procedure for managing the machine power is as follows:
Power Off
The Power Off function turns off the machine. When you use this function, you will not be able to turn the
machine on from the printer driver.
1.
Open the printer driver setup window
2.
Execute power off
Click Power Off on the Maintenance tab. When the confirmation message appears, click OK.
The machine power switches off, and the Maintenance tab is displayed again.
Auto Power
Auto Power allows you to set Auto Power Off.
The Auto Power Off function automatically turns off the machine when print data has not been received
from the computer for a specified period of time.
1.
Open the printer driver setup window
2.
Make sure that the machine is on and then click Auto Power on the Maintenance tab
The Auto Power Setting dialog box opens.
Note
If the machine is off or bi-directional communication is disabled, a message may appear
because the computer cannot collect the machine status.
If this happens, click OK to display the most recent settings specified on your computer.
3.
If necessary, complete the following setting:
Auto Power Off
Specify time from the list. When this time lapses without any print data being received, the machine
is turned off automatically.
4.
Apply the settings
Click OK. When the confirmation message appears, click OK.
The Maintenance tab is displayed again.
The auto power off function is enabled hereafter. If you want to disable this function, select Disable
from the list according to the same procedure.
This manual downloaded from http://www.manualowl.com
>
Changing the Machine Settings
>
Changing Machine Settings from
Page 692 of 731 pages