Canon MG2100 Series On-Screen Manual page 531

An Error Code Is Displayed on the LED
(LED display)
E, 0, 6
(LED display)
E, 0, 7
(LED display)
E, 0, 8
(LED display)
E, 1, 2
(LED display)
E, 1, 3
This manual downloaded from http://www.manualowl.com
is not installed.
The paper output cover is
open.
FINE cartridge is not
installed in the correct
position.
Ink absorber is almost full.
Cannot print the contents
on CREATIVE PARK
PREMIUM.
The remaining ink level
cannot be detected.
Replacing a FINE Cartridge
Appropriate FINE cartridge is not
installed.
Install the appropriate FINE
cartridge.
Replacing a FINE Cartridge
If the error is not resolved, contact the
service center.
The paper output cover is open.
Close the paper output cover.
Make sure that each FINE cartridge is
installed in the correct position.
Replacing a FINE Cartridge
Press the machine's Black or Color
button to continue printing. Contact
the service center.
You cannot print the contents on
CREATIVE PARK PREMIUM.
When you print the contents on
CREATIVE PARK PREMIUM, confirm
the message on the computer
screen, make sure that genuine
Canon FINE cartridges are all
installed properly, then start printing
again.
The ink may have run out.
The function for detecting the
remaining ink level will be disabled
since the ink level cannot be correctly
detected.
If you want to continue printing
Page 531 of 731 pages