Canon MG2100 Series On-Screen Manual page 530

An Error Code Is Displayed on the LED
> >
Home Troubleshooting
U305
An Error Code Is Displayed on the LED
Alarm Lamp Is Lit Orange
When a machine error occurs, the Alarm lamp is lit orange and the error code as follows is
displayed on the LED. Check the error code displayed on the LED and take the appropriate action
to correct the error.
* Depending on the error occurred, the Alarm lamp is not lit.
Error Code
E, 0, 2
(LED display)
E, 0, 3
(LED display)
E, 0, 4
(LED display)
E, 0, 5
This manual downloaded from http://www.manualowl.com
About Errors Displayed > An Error Code Is Displayed on the LED
Cause
The machine is out of
paper./Paper does not
feed.
Paper jam.
The FINE cartridge is not
installed properly.
The FINE cartridge is not
installed properly./
Appropriate FINE cartridge
Action
Reload the paper on the front tray
and press the Black or Color button.
When you load the paper, insert the
paper stack until the leading edge
touches the far end of the front tray.
The paper may be jammed. Remove
the jammed paper, reload paper
properly in the machine, then press
the Black or Color button.
Paper Jams
The FINE cartridge is not installed
properly.
Open the paper output cover. When
the head cover opens, push up the
ink cartridge lock lever to confirm that
the FINE cartridges are installed
properly. After that, close the paper
output cover.
If the error is not resolved, remove
the FINE cartridges, then install them
again.
Refer to
Replacing a FINE Cartridge
for how to install the FINE cartridges.
The FINE cartridge is not
installed.
Install the FINE cartridge.
Page 530 of 731 pages