Computer Stops Operating During Scanning - Canon MG2100 Series On-Screen Manual

Computer Stops Operating during Scanning

> >
Home Troubleshooting
Operating during Scanning
S910
Computer Stops Operating during Scanning
Check 1: Restart the computer, reduce the output resolution in ScanGear
(scanner driver) and scan again.
Output Settings
Check 2: Delete unnecessary files to obtain sufficient free hard disk space,
then scan again.
Error message may appear if there is not enough hard disk space to scan and save, when the image
size is too large (such as when scanning a large document at high resolution).
Check 3: For Location of Temporary Files in MP Navigator EX, specify a
folder on a drive with sufficient free space.
General Tab
Check 4: Multiple devices may be connected to USB ports.
Disconnect other devices.
This manual downloaded from http://www.manualowl.com
>
Problems with Scanning Problems with Scanning
Page 549 of 731 pages
> Computer Stops
Page top