Scanning In Basic Mode - Canon MG2100 Series On-Screen Manual

Scanning in Basic Mode

> >
Home Scanning Scanning from a Computer
Scanning with Advanced Settings Using ScanGear (Scanner Driver)
S203
Scanning in Basic Mode
Use the Basic Mode tab to scan easily by following the on-screen steps.
See " Scanning Multiple Documents at One Time with ScanGear (Scanner Driver)
documents at one time.
Important
The following types of documents may not be cropped correctly. In that case, click
(Thumbnail) on the Toolbar to switch to whole image view and scan.
- Photos that have a whitish border
- Documents printed on white paper, hand-written text, business cards, etc.
- Thin documents
- Thick documents
The following types of documents cannot be cropped correctly.
- Documents smaller than 1.2 inches (3 cm) square
- Photos that have been cut to various shapes
1.
Place the document on the Platen, then start ScanGear (scanner driver).
Placing Documents (When Scanning from a Computer)
Starting ScanGear (Scanner Driver)
2.
Set Select Source according to the document placed on the Platen.
Note
To scan magazines containing many color photos, select Magazine (Color).
3.
Click Preview.
Preview image appears in the Preview area.
This manual downloaded from http://www.manualowl.com
>
Scanning with Other Application Software (ScanGear)
> Scanning in Basic Mode
Page 438 of 731 pages
>
" to scan multiple