Canon MG2100 Series On-Screen Manual page 652

Replacing a FINE Cartridge
2.
Open the paper output cover (E).
When the FINE cartridge holder moves to the replacement position, the head cover (F) OPENS
AUTOMATICALLY.
Caution
Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the FINE cartridge holder until
it stops completely.
Important
The head cover will open automatically after you open the paper output cover.
If you have closed the head cover while replacing a FINE cartridge, close the paper output cover, then
open it again.
Trying to force open the head cover with your hand may cause the machine to malfunction.
Do not touch the metallic parts or other parts inside the machine.
If the paper output cover is left open for more than 10 minutes, the FINE cartridge holder moves to the far
right and the Alarm lamp lights. In this case, close the paper output cover, then open it again.
3.
Remove the empty FINE cartridge.
Push down the ink cartridge lock lever until it clicks.
(1)
This manual downloaded from http://www.manualowl.com
Page 652 of 731 pages