Machine Moves But Ink Is Not Ejected - Canon MG2100 Series On-Screen Manual

Machine Moves But Ink Is Not Ejected

> >
Home Troubleshooting
U323
Machine Moves But Ink Is Not Ejected
Check 1: Are the print head nozzles clogged?
Print the Nozzle Check Pattern to determine whether the ink ejects properly from the print head
nozzles.
Refer to When Printing Becomes Faint or Colors Are Incorrect
Print Head Cleaning, and Print Head Deep Cleaning.
If the Nozzle Check Pattern is not printed correctly:
After performing the Print Head Cleaning, print the Nozzle Check Pattern and examine the
pattern.
If the problem is not resolved after performing the Print Head Cleaning twice:
Perform the Print Head Deep Cleaning.
If the problem is not resolved after performing the Print Head Deep Cleaning, turn off the
machine and perform another Print Head Deep Cleaning after 24 hours.
If the problem is not resolved after performing the Print Head Deep Cleaning twice:
Ink may have run out. Replace the FINE cartridge.
Check 2: When a FINE cartridge runs out of ink, replace it with a new
one.
Check 3: Is the FINE cartridge installed properly?
If the FINE cartridge is not installed securely, ink may not be ejected correctly.
Open the paper output cover, then the head cover opens.
Push up the ink cartridge lock lever to confirm that the FINE cartridge is installed properly.
After confirming that the FINE cartridge is installed properly, close the paper output cover.
If the problem is not resolved, remove the FINE cartridges, then install them again.
Refer to Replacing a FINE Cartridge
This manual downloaded from http://www.manualowl.com
Cannot Print > Machine Moves But Ink Is Not Ejected
for how to install the FINE cartridges.
for the Nozzle Check Pattern printing,
Page top
Page 590 of 731 pages