Printer Moves But Ink Is Not Ejected - Canon PIXMA iP 3300 User Manual

Out of paper.
Printing
documents with
plenty of
photographs or
illustrations.

Printer Moves But Ink Is Not Ejected

time, the printer may stop printing to
protect the Print Head. In this case,
printing will not resume automatically.
Turn the printer off for at least 15
minutes.
Caution
The Print Head and the surrounding
area can become extremely hot inside
the printer. Never touch the Print Head
or nearby components.
Make sure that paper is loaded in the
selected paper source.
Reload paper if no paper is found in the
selected paper source (Auto Sheet
Feeder or the Front Feeder).
If the same paper is loaded in the other
paper source, you can switch the paper
source with the printer driver to continue
printing.
If both paper sources have run out of
paper, confirm the selected paper
source and load paper there.
When the POWER lamp is flashing
green, the printer or the computer is
processing data. Printing large data
such as photos or graphics takes time
for the printer and the computer to
process, during which the printer may
appear to have stopped operating.
In addition, when printing data that uses
a large amount of ink continuously on
plain paper, the printer may pause
temporarily. In either case, wait until the
process is complete.
Note
If you are printing a document with a
large printing area or printing multiple
copies of a document, printing may
pause to allow the ink to dry.
149