Enabling Allow Trans Exist Call - Yealink T4 Series User Manual

Enabling Allow Trans Exist Call

Downloaded from ManualsNet.com
Select the desired transfer mode from the Transfer Mode via Dsskey field.
2.
If you select Blind Transfer, press the Transfer key, BLF/BLF List key or Speed Dial key

to blind transfer the call to the desired contact.
If you select Attended Transfer, press the Transfer key, BLF/BLF List key or Speed

Dial key to dial out the desired contact and then perform an attended or a
semi-attended transfer.
If you select New Call, press the Transfer key, BLF/BLF List key or Speed Dial key to

place a new call to the desired contact.
Click Confirm.
3.
On the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, you can transfer a call to another
existing call when Allow Trans Exist Call is enabled. Make sure the IP phone has more than one
call.
Procedure:
Click Features->General Information.
1.
search engine
Basic Call Features
137