Voice Mail - Yealink T4 Series User Manual

Voice Mail

Note
Configuring the Voice Mail Code
Downloaded from ManualsNet.com
You can also delete all text messages by selecting the Delete All.
Voice Mail feature allows you to leave voice mails for someone or listen to the mails stored in a
voice mailbox on your IP phone. This feature is set up on the server side and not all servers
support this feature.
When receiving a new voice mail, the phone plays a warning tone and the power indicator LED
slowly flash red. A message of "n New Voice Mail(s)" ("n" indicates the number of unread voice
messages) are displayed on the LCD screen.
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
When the phone receives a voice mail, the text message window will pop up by default.
system administrator can disable this feature.
Procedure:
Navigate to Menu->Message->Voice Mail->Set Voice Mail Code.
1.
You can also press the MESSAGE key when the voice mail code is not configured.
Enter the voice mail code (for example, *4) in the desired account field.
2.
Press Save.
3.
search engine
Advanced Phone Features
.Your
209