Configuring The Static Ipv4 Address - Yealink T4 Series User Manual

User Guide for T4 Series IP Phones

Configuring the Static IPv4 Address

40
Downloaded from ManualsNet.com
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to IPv4->DHCP IPv4
Client.
Press Save.
4.
If you want to configure DHCP for IPv6, select IPv6 or IPv4 & IPv6 from the IP Mode in the step
2.
DHCP is configurable via web user interface at the path Network->Basic.
Procedure:
Navigate to Menu->Advanced (default password: admin) ->Network->WAN Port.
1.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to
Menu->Settings->Advanced Settings (default password: admin) ->Network->WAN
Port.
Select IPv4 or IPv4 & IPv6 from the IP Mode field.
2.
Enter IPv4, and then select Static IP from the Type field.
3.
For the SIP-T42S/T42G/T41S/T41P/T40G/T40P IP phone, navigate to IPv4->Static IPv4
Client.
Enter the desired value in the IP Address, Subnet Mask, Default Gateway, Pri.DNS and
4.
Sec.DNS field respectively.
Press Save.
5.
search engine