6.23 Lubricating the Windrower
Table 6.2 Recommended Lubricant
Spec.
SAE Multi-Purpose
6.23.1 Lubrication Procedure
DANGER
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
1. Wipe grease fitting with a clean cloth before greasing, to avoid injecting dirt and grit.
2. Inject grease through fitting with grease gun until grease overflows fitting, except where noted.
3. Leave excess grease on fitting to keep out dirt.
4. Replace any loose or broken fittings immediately.
5. If fitting will NOT take grease, remove and clean thoroughly. Also clean lubricant passageway. Replace fitting,
if necessary.
169886
ASSEMBLING THE WINDROWER
Description
High temperature, extreme pressure (EP2)
performance with 1% max molybdenum
disulphide (NLGI Grade 2) lithium base
Use
As required unless otherwise
specified.
165
Revision A