Pd789426, 789436 Subseries Only); Block Diagram Of P80 And P81 - NEC UPD789426 Series User Manual

µ
4.2.8 Port 8 (

PD789426, 789436 Subseries only)

This is a 2-bit I/O port with an output latch. Port 8 can be specified in the input or output mode in 1-bit units by
using port mode register 8 (PM8). When using pins P80 and P81 as input port pins, on-chip pull-up resistors can be
connected in 1-bit units by setting pull-up resistor option register B8 (PUB8).
This port is set in the input mode when the RESET signal is input.
Figure 4-16 shows a block diagram of port 8.
WR
PUB8
RD
WR
PORT
WR
PM
PUB8: Pull-up resistor option register B8
PM: Port mode register
RD: Port 8 read signal
WR: Port 8 write signal
CHAPTER 4 PORT FUNCTIONS
Figure 4-16. Block Diagram of P80 and P81
PUB80, PUB81
Output latch
(P80, P81)
PM80, PM81
User's Manual U15075EJ2V1UD
V
DD
P-ch
P80, P81
93