Description Of Pin Functions; P00 To P03 (Port 0); P10, P11 (Port 1); P20 To P26 (Port 2) - NEC UPD789426 Series User Manual

8-bit single-chip microcontrollers
Table of Contents

Advertisement

2.2 Description of Pin Functions

2.2.1 P00 to P03 (Port 0)

These pins constitute a 4-bit I/O port. In addition, these pins enable key return signal detection.
Port 0 can be specified in the following operation modes in 1-bit units.
(1)
Port mode
These pins constitute a 4-bit I/O port and can be set in the input or output port mode in 1-bit units by port
mode register 0 (PM0). When used as an input port, use of an on-chip pull-up resistor can be specified by
setting pull-up resistor option register 0 (PU0) in port units.
(2)
Control mode
In this mode, P00 to P03 function as key return signal detection pins (KR0 to KR3).

2.2.2 P10, P11 (Port 1)

These pins constitute a 2-bit I/O port and can be set in the input or output port mode in 1-bit units by port mode
register 1 (PM1). When used as an input port, use of an on-chip pull-up resistor can be specified by setting pull-up
resistor option register 0 (PU0) in port units.

2.2.3 P20 to P26 (Port 2)

These pins constitute a 7-bit I/O port. In addition, these pins enable buzzer output, timer output, serial interface
data I/O, and serial clock I/O.
Port 2 can be specified in the following operation modes in 1-bit units.
(1)
Port mode
In this mode, P20 to P26 function as a 7-bit I/O port. Port 2 can be set in the input or output port mode in 1-
bit units by port mode register 2 (PM2). When used as an input port, use of an on-chip pull-up resistor can
be specified by setting pull-up resistor option register B2 (PUB2) in 1-bit units.
(2)
Control mode
In this mode, P20 to P26 function as the buzzer output, timer output, serial interface data I/O, and serial clock
I/O.
(a)
Buzzer output
This is the buzzer output pin of 16-bit timer 90.
(b)
TO90
This is the timer output pin of 16-bit timer 90.
(c)
SI20, SO20
These are the serial data I/O pins of the serial interface.
(d)
SCK20
This is the serial clock I/O pin of the serial interface.
(e)
RxD20, TxD20
These are the serial data I/O pins of the asynchronous serial interface.
40
CHAPTER 2 PIN FUNCTIONS
User's Manual U15075EJ2V1UD

Advertisement

Table of Contents
loading

Table of Contents