To Load A Sheet - HP Designjet 700 User Manual

To Load a Sheet

Which way round?
As you load the sheet, it is the under side on which the plotter will print. With
Which way up?
most media types, the two sides are different and so it is important to load the sheet
correctly. Refer to the table below.
750C Plus
3-18
Working With Media and Cartridge(s)
Loading Media
You can load a sheet in either portrait or landscape orientation. Unless using
the option (see page 4-7), load the sheet in the same orientation as you
Rotate
have specified in your software.
Media Type
Opaque bond
Translucent bond
Natural tracing paper
Vellum
Coated paper
Heavy coated paper
Matte film
Clear film
High-gloss photo paper
Semi-gloss photo paper
High-gloss film
or
Media-Loading Tips
Both sides are the same. If the sheet is curled,
load with the curve (hollow) side towards you.
Load with the coated side down.
On HP Coated Paper and Heavyweight Coated
Paper, look for the small notch in the corner:
When loading in a portrait orientation, make
sure the notch is on the right side of the leading
edge.
When loading in a landscape orientation, make
sure the notch is on the left side of the leading
edge.
Load with the matte side down.
Load with the rougher side down.
Load with the glossy side down.