When Does The Plotter Try To Nest Pages; Which Pages Qualify For Nesting; Which Pages May Be Rotated - HP Designjet 700 User Manual

When Does the Plotter Try to Nest Pages?

When all the following are true:
The plotter is loaded with roll media rather than sheet media.
In the front-panel menus,
In the front-panel menus,
See page 6-12.

Which Pages Qualify for Nesting?

In order to be in the same nest, the individual pages must be compatible on both
the following criteria:
Color or monochrome
750C Plus
Either all are color or all are monochrome. Remember that monochrome may
include a color plot rendered in grayscales by use of the front-panel
key – see page 5-9.
Print resolution
Either all are 300 dpi or all are 600 dpi – see page 5-11.

Which Pages May be Rotated?

Apart from obvious physical limitations on the roll, any page containing raster data
will not be rotated.
If you are using the Microsoft Windows driver supplied with this plotter, your files
do contain raster data and therefore the pages will not be rotated in nesting. The
normal line drawings of most CAD software do not contain raster data, and
therefore may be rotated in nesting.
Avoiding Media Waste by Nesting Pages (Roll Media Only)
is ON (the default). See page 6-5.
Queue
is ON (that is, set to either
Nest
Managing Your Plots
or ).
Optimal In order
Color/Mono
6-11