Task 2: Install Memory Expansion Modules (Optional) - HP Designjet 700 User Manual

Setting Up the Plotter
Task 2: (Optional) Install Memory Expansion Modules

Task 2: Install Memory Expansion Modules (Optional)

700
Your plotter comes with 5.5 MB of standard memory.
750C Plus
Your plotter comes with 11 MB of standard memory.
You can expand this by adding one or two memory expansion modules, in any
combination. Supported sizes are 4 MB, 8 MB, 16 MB and 32 MB. So the
maximum standard memory for your plotter is:
700
750C Plus
For HP part numbers, see page 11-14.
1
Make sure that the plotter is switched OFF and that neither the power cord
nor an interface cable is connected.
1-6
5.5 + 32 + 32 = 69.5 MB
11 + 32 + 32 = 75 MB
X
X
1847