Changing The Graphics Language Setting For A Different Application; To Change The Graphics Language Setting - HP Designjet 700 User Manual

Changing the Graphics Language Setting for a
Different Application
Your software application communicates with the plotter by a graphics language.
The plotter supports HP industry standard CAD language
The plotter's default setting is designed to work successfully with most
applications, and is called 7586, HP-GL/2. However, it's possible that with some
older or less common applications, you may need to change this setting to
HP-GL/2, as explained in the table below.

To Change the Graphics Language Setting

Graphics
Device setup
Language
7586, HP-GL/2
Lang
Full menu mode
Default: 7586,
HP-GL/2
HP-GL/2

Changing the Graphics Language Setting for a Different Application

HP-GL/2 (7856)
HP-GL (7586B)
HP RTL
Comments
This should work successfully for most software applications.
With this graphics language setting another parameter is
available: Terminator. Try changing this setting from Normal
(the default) to Special:
if you are using an obsolete HP 7586 (pen plotter) driver,
and your plots are incomplete.
Try this setting:
if you have experienced plot position problems.
if you have experienced timing problems.
However, if you choose this setting, you don't have access to
the Terminator option.
Reconfiguring Your Plotter
7-7