Loading sheet media
To load a sheet (without the roll-feed option installed)
To learn how to load a sheet correctly first time, follow steps 1 through 7.
When you load a sheet, the plotter checks that it is correctly aligned. If it is very
badly aligned, the plotter flashes an error on the front panel, as explained in step 8
below, and you must try again. If your alignment is almost correct, you have a
chance to re-align it, as explained in steps 8 and 9 below.
1
If your plotter has no legs, you'll find it easier if it is positioned at the edge of the
table.
2
Which way round?
You can load a sheet in either portrait
or landscape orientation.
Unless using the
Rotate
orientation as you have specified in your software. If you are loading an A- or
A4-size sheet, portrait orientation is recommended.
portrait
option (see page 3–7), load the sheet in the same
Working with media
Loading sheet media
or
landscape
2–9