HP Designjet 700 User Manual page 63

Example 4: Configuring the Solaris 2.x Print Spooler for Sun SPARCstations
In order to perform the following steps you must be a superuser or belong to the
special sysadmin (GID=14) group. If you are using the NIS+ name service, you
may need NIS+ permission to modify the printer table. Refer to your Sun
documentation for details.
1 Create a directory for print spooling. All application users need read and write
permission for this directory, so you must be a superuser to perform this step. For
example, from the command line of a shell, type:
mkdir /usr/spool/cad
chmod 777 /usr/spool/cad
2 Start the Administration Tool utility (from OpenWindows ).
% /bin/admintool
3 Load the
Printer Manager
.
Local Printer
4 In the
Add Local Printer
Item Select
Printer Name: For example, HP DesignJet 700 or
HP DesignJet 750C Plus, de ending on the lotter you have HP DesignJet 750C Plus depending on the plotter you have
purchased
Printer Type: Other, and set it to Unknown
File Contents: Any
Banner: Not required
For full details on how to use the
Sun documentation.
5 Exit admintool .
6 For serial connections:
a Make sure the plotter's baud rate is 9600 and parity is even.
b From the command line of a shell, as superuser, enter the following:
lpadmin –p pname –o "stty='9600 evenp –cstopb ixon ixoff'"
where pname is the same as
is in the superuser's path.
window, and, from the
Add Printer
dialog box:
Printer Manager
Printer Name in step 4. It is assumed that
Setting Up the Plotter
Extra Tips For UNIX Users
edit menu, select
option of , consult your
admintool
/usr/sbin
Add
1-43