Expecting; If The Plotter Has Printed A Different Plot Than The One You Were Expecting - HP Designjet 700 User Manual

If the Plotter Has Printed a Different Plot Than the One You
Were Expecting
?!
One possibility is that you have accidentally initiated one of the plotter's internal
plots:
750C Plus
If the Quality Of A Color Plot Is Not as Good as You Were

Expecting

750C Plus
The Cartridge Alignment Plot.
printed automatically every time you replace, or reseat a cartridge.
The Current Configuration Plot
configuration details) This is plotted by simultaneously pressing the two arrow
keys on the front-panel
.
. (A graphic plot with product information) This is plotted
The Sample Plot
from the front-panel menu
The Front-Panel Menu Plot
structure) This is plotted from the front-panel menu
The Service Configuration Plot
plotted from the front-panel menu
The Palette Demo Plot . (A plot with 256 colored squares) This is plotted
from the front-panel menu
Select Best on the front-panel Print Quality key and plot again.
Did you specify the correct media type when loading? The highest line quality
is only produced using Opaque Bond, Coated Paper or Matte Film. For details
of media types, see page 3-3. To find out the plotters' current media type
setting, see page 7-2.
Your application-software driver may be overriding the
the front–panel menu.
Are you plotting something other than a line drawing, for example a
CorelDRAW! file? If so, you may want to experiment to improve the output
quality by setting
Sharp lines
Are you plotting a CAD drawing with small raster images? Try setting
lines to On , and plot again.
When loading the paper, specify "Heavy coated paper" on the front panel, rather
than "Coated paper".
Solving Problems with Plot Position or Content
(A small pattern of lines without text.) This is
. (A graphic and text plot with the current
Demos / Samples.
. (A text plot showing the complete menu
Demos / Menu.
. (A text plot with service information) This is
Utilities / Service Config.
Demos / Palette.
to on the front-panel menu, and plot again.
Off
Troubleshooting
selection on
Sharp lines
Sharp
9-15