About This Manual - SMART Embedded Computing RTM-ATCA-F140 Series Installation & Use Manual

About this Manual

Overview of Contents
This manual is divided into the following chapters and appendices.
Safety Notes on page 15
Notice de Sécurité on page 23
Sicherheitshinweise on page 31
Chapter 1, Introduction on page 39
Chapter 2, Hardware Preparation and Installation on page 43
prerequisites and the installation itself.
Chapter 3, Controls, LEDs, and Connectors on page 51
as connectors and LEDs.
Chapter 4, Functional Description on page 53
module (RTM) and provides information on the IPMI functionality of the RTM.
Appendix A, RTM-ATCA-F140-D Information on page 73
the RTM-ATCA-F140-D.
Appendix B, Related Documentation on page 79
manuals that are related to the RTM and the ATCA-F140.
Abbreviations
This document uses the following abbreviations:
Abbreviation
AMC
ATCA
BIX
EEPROM
FET
FPGA
FRU
FIX
IPMC
LED
RTM-ATCA-F140 Series Installation and Use (6806800M97M)
summarizes the safety instructions in the manual.
is a European French translation of the Safety Notes section.
is a German translation of the Safety Notes section.
describes the main features of the RTM-ATCA-F140.
Definition
Advanced Mezzanine Card
Advanced Telecom Computing Architecture
Base Interface Switch
Electrically Erasable Programmable Read-Only Memory
Field-effect Transistor
Field-programmable Gate Array
Field Replaceable Unit
Fabric Interface Switch
Intelligent Platform Management Controller
Light-emitting Diode
describes the installation
describes external interfaces such
contains a block diagram of the rear transition
contains information specific to
lists SMART Embedded Computing user
11