About This Manual - SMART Embedded Computing RTM-ATCA-736x-10G Series Installation And Use Manual

About this Manual

Overview of Contents
This Reference Guide is intended for users qualified in electronics or electrical engineering.
Users must have a working understanding of Peripheral Component Interconnect (PCI),
AdvancedTCA®, and telecommunications.
The manual contains the following chapters and appendices:
Safety Notes on page 15
Sicherheitshinweise on page 19
section.
Chapter 1, Introduction on page 23
Chapter 2, Hardware Preparation and Installation on page 27
requirements, hardware accessories, switch settings, installation and removal procedures.
Chapter 3, Controls, LEDs, and Connectors on page 43
blade. This includes connectors and LEDs.
Chapter 4, Sensor Data Records on page 53
and sensor data.
Appendix A, Related Documentation on page 55
documentation.
Abbreviations
This document uses the following abbreviations:
Abbreviation
ANSI
ATCA
ATN
BMC
CISPR
CMD
EMC
EMV
RTM-ATCA-736x-10G Installation and Use (6806800P29G)
lists safety notes applicable to the blade.
provides the German translation of the safety notes
describes the main features of the blade.
provides information on the blade's FRU info
Definition
American National Standards Institute
Advanced Telecommunications Computing Architecture
Attention
Baseboard Management Controller
Comité Internationale Spécial des Perturbations
Radioelectrotechnique
Command
Electromagnetic Compatibility
Elektromagnetische Vertraeglichkeit
outlines the installation
describes external interfaces of the
provides links to further blade-related
9