Configuring Ethernet Settings - Canon 1418C025 User Manual

Configuring Ethernet Settings

Ethernet is a standard for communicating data in a local area network (LAN). You can set the communication mode
(half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). In general, the machine can be used without
changing the defaults (
environment.
1
Press .
2
Use / to select <Network Settings>, and press
● If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and press
the System Manager PIN(P. 222)
3
Select <Ethernet Driver Settings>
4
Select whether to configure Ethernet settings automatically or manually.
Configuring Ethernet settings automatically
Select <On>, and press
Ethernet type that can be used.
Configuring Ethernet settings manually
1
Select <Off>, and press
2
Select the communication mode.
● Select <Communication Mode>
<Half Duplex>
Alternately sends and receives communication data. Select when the machine is connected to a
networking device using half duplex.
<Full Duplex>
Simultaneously sends and receives communication data. Use this setting for most environments.
Ethernet Driver Settings(P. 289) ), but you can change these settings to suit your network
. The machine detects and automatically sets the communication mode and the
.
Network
<Auto Detect>.
select <Half Duplex> or <Full Duplex>
201
.
.
.
19Y4-042
Setting