Only Interface; Rs-232 Standard Factory Settings; Baud Rate - Datalogic Heron HD3100 Product Reference Manual

RS-232 ONLY Interface
Use the programming bar codes in this chapter if modifications to the standard
RS-232 interface settings are necessary to meet your system's requirements.
Additional settings which apply to both the RS-232 and USB interfaces are
available in
B R
on page 21
AUD ATE
S B
on page 22
TOP ITS

RS-232 Standard Factory Settings

Reference
tings.

Baud Rate

Baud rate is the number of bits of data transmitted per second. Set the scan-
ner's baud rate to match the baud rate setting of the host device. With an
improper baud rate setting, data may not reach the host correctly.
$CR2BA01
Baud Rate = 2400
$CR2BA03
Baud Rate = 9600
Product Reference Guide
RS-232 ONLY Interface
Chapter 5, RS-232/USB-COM
P
ARITY
H
Appendix B, Standard Defaults


Enter/Exit Programming Mode
Interfaces.
on page 23
C
ANDSHAKING ONTROL
for a listing of standard factory set-
$CR2BA00
Baud Rate = 1200
$CR2BA02
Baud Rate = 4800
DEFAULT
on page 24


21