Table of Contents
Advertisement
Keyboard Interface
Intercharacter Delay
This parameter specifies the intercharacter delay between the end of one char-
acter and the beginning of the next. The delay can be set within a range of zero
(0) to 990 milliseconds in 10ms increments. A setting of zero specifies no
delay.
instructions.
Select Intercharacter Delay Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the begin-
Product Reference Guide
See
"Intercharacter Delay"
$CR21C
ning.
00 = No Intercharacter Delay
DEFAULT
Enter/Exit Programming Mode
on page 227
for more detailed programming
$CR21C00
Intercharacter Delay = No Delay
To configure this feature, scan the ENTER/EXIT bar code
above, then the bar code at left followed by digits from the
Alphanumeric characters in
representing your desired character(s). End by scanning
the ENTER/EXIT bar code again.
CANCEL
Appendix D, Keypad
~
43
Advertisement
Table of Contents
