Response Speed; Output Timing Delays - Banner Q3XTBLD150-Q8 Instruction Manual

• —40%
• —50%
Dark Set options:
• —minimum
• —25%
• —50%
• —100%
• —200%

3.1.4 Response Speed

Use this menu to select the response speed. The default is 1 millisecond.
• —250 microseconds
• —1 millisecond
• —5 milliseconds
Table 1: Tradeoffs
Response Speed
250 µs
1 ms
5 ms
25 ms (Master-Slave Sync)

3.1.5 Output Timing Delays

Use this menu to select the output timing delay to be set. Only one delay type can be used at a time. The default is no delay.
• —No delay
• —Enables simultaneous on and off delay timers
• —One-shot. Enables a one-shot, fixed output pulse duration
Output
OFF Delay
ON Delay
1-Shot
When either or
timer(s):
• —On delay
Repeatability Crosstalk Immunity
60 µs Disabled
300 µs Enabled
520 µs Enabled
Best for direct line of sight
13 ms
crosstalk
D
D
Figure 6. Output Timing Delays
is chosen, the sensor returns to the Setup menu and additional options become available to set the
www.bannerengineering.com - Tel: 763.544.3164
D
D
D
Time
Q3X Laser Contrast Sensor
High Efficiency Light Rejection
Disabled
Disabled
Enabled
Enabled
ON
OFF
D
(D = 1ms - 90.0s)
9