Table of Contents
Advertisement
Quick Links
WORLD-BEAM QS18E Clear Object Detection
Instruction Manual
™
Expert
Coaxial Polarized Retroreflective Sensor for Clear Object Detection
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious injury or
death. This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-energized
sensor output condition.
Models
Models
QS18EN6XLPC
P
QS18EP6XLPC
CLEAR OBJECT
1
The standard 2 m (6.5 ft) cable models are listed.
•
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number (for example QS18EN6XLPC W/30)
•
To order the 4 pin Euro M12 integral connector, add the suffix "Q8" (for example QS18EN6LPCQ8)
•
To order the 4 pin Euro M12 150 mm (6 inch) cable, add the suffix "Q5" (for example QS18EN6LPCQ5)
•
To order a 4 pin Pico M8 integral connector, add the suffix "Q7" (for example QS18EN6LPCQ7)
•
To order a 4 pin Pico M8 150 mm (6 inch) cable, add the suffix "Q" (for example QS18EN6XLPCQ)
Original Document
194469 Rev. C
•
Reliably detects clear, translucent, or opaque objects — including PET, glass
containers, and transparent films
•
Coaxial optics enable reliable detection of targets to the face of the sensor with
no dead zone
•
"Clear Tracking" automatic compensation algorithm provides long and reliable
operation by compensating for dust build up and ambient temperature changes
•
Fast response speed with low jitter for high speed bottling and packaging
applications
•
Bright, visible red light spot makes alignment easy
•
3 user-selectable thresholds optimize performance to the type of object being
detected
•
Easy configuration of sensor by remote teach input or tactile push button
•
Convenient mounting options available for 18 mm barrel or side mount
•
Bright indicator LEDs show operating status from 360˚
•
IP67 rated ABS housing
•
Dedicated PNP or NPN output with matching remote input wire
Mode
COAXIAL
0 to 1.3 m (0 to 4.2 ft) on BRT-40X19A
0 to 2.0 m (0 to 6.5 ft) on BRT-51X51BM
0 to 3.0 m (0 to 9.8 ft) on BRT-92X92C
POLAR RETRO
Range
13 August 2018
1
Output
Connector
NPN
2 m cable (6.5 ft)
PNP
194469
Advertisement
Table of Contents
Related Manuals for Banner WORLD-BEAM Expert QS18E Series
Summary of Contents for Banner WORLD-BEAM Expert QS18E Series
- Page 1 WORLD-BEAM QS18E Clear Object Detection Instruction Manual ™ Expert Coaxial Polarized Retroreflective Sensor for Clear Object Detection • Reliably detects clear, translucent, or opaque objects — including PET, glass containers, and transparent films • Coaxial optics enable reliable detection of targets to the face of the sensor with no dead zone •...
-
Page 2: Sensor Configuration
WORLD-BEAM QS18E Clear Object Detection Overview The Banner QS18 sensor is a high performance clear object detection sensor. The polarized coaxial optical design ensures reliable detection of Amber LED (Output Indicator) transparent, translucent, and opaque targets at any distance between the sensor and the reflector. -
Page 3: Push Button Configuration
WORLD-BEAM QS18E Clear Object Detection Push Button Configuration Use the push button to configure the sensor. Click the push button according to Push Button Input Flowchart. After a configuration has been selected the sensor flashes both the green and amber LED to show which configuration was selected followed by a rapid flashing of both the green and amber LED in unison to show acknowledgement and acceptance of the configuration. -
Page 4: Light Set
WORLD-BEAM QS18E Clear Object Detection Light Set Use Light SET for low contrast applications. Use either the push button or Sensor position’s threshold is a remote input wire procedure to configure the sensor. programmable % offset below the presented condition Example Applications For Offset Percentages Output ON Output OFF... -
Page 5: Specifications
WORLD-BEAM QS18E Clear Object Detection 2. Access Dark Set mode and set the sensing condition. Method Action Result DARK SET Configuration Accepted Press and hold the push Push Button Green and Amber LED Indicators: Flash 2 times. button 2 to 4 seconds. Green and Amber LED Indicators: Acceptance flash - both LEDs flash 5 times rapidly in unison. -
Page 6: Performance Curves
WORLD-BEAM QS18E Clear Object Detection Dimensions Euro QD Models Pico Models Cable Models Performance Curves Spot Size vs. Distance Excess Gain BRT-92X92C BRT-84X84A BRT-51X51BM BRT-60X40C BRT-2X2LVC BRT-60X40C-PS BRT-32X20AM BRT-40X19A BRT-60X40 IP69K BRT-THG-3X3 1000 1500 2000 2500 3000 1.0 mm 10.0 mm 100 mm 1000 mm 10000 mm... - Page 7 WORLD-BEAM QS18E Clear Object Detection Accessories Cordsets 4-Pin Threaded M12/Euro-Style Cordsets Model Length Style Dimensions Pinout (Female) MQDC-406 1.83 m (6 ft) 44 Typ. MQDC-415 4.57 m (15 ft) Straight MQDC-430 9.14 m (30 ft) M12 x 1 ø 14.5 MQDC-450 15.2 m (50 ft) MQDC-406RA...
- Page 8 WORLD-BEAM QS18E Clear Object Detection BRT-92X92C BRT-40X19A • Rectangular, acrylic target • Square, acrylic target • Reflectivity Factor: 1.3 • Reflectivity Factor: 3.0 • Temperature: –20 °C to +60 °C (–4 °F to • Temperature: –20 °C to +60 °C (–4 °F to +140 °F) +140 °F) •...
- Page 9 Banner Engineering Corp. Limited Warranty Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.