Advertisement
Step 21: Attach Cupola
Part 2
B: Place Cupola Assembly over both Mount Blocks and attach as shown in fig. 21.5 using 4 (TS) #6 x 30mm
Trim Screws.
C: Pull string for bell through the square hole in the roof assembly. (fig. 21.6)
Fig. 21.5
Fig. 21.6
TS
x 2 per
side
4X #6 x 30mm Trim Screw
4 x
Cupola
Assembly
string for bell
Hardware
#6 x 30mm Trim Screw
TS
50
Advertisement
