KidKraft BLOOMFIELD F29180 Installation And Operating Instructions Manual page 33

Step 11: Access Ladder Assembly
Part 3
E: On the inside bottom of (9527) Ladder Rail Right attach 1 (9195) Ladder Brace using 2 (S11) #8 x 2" Wood
Screws. (fig. 11.4 and 11.5)
F: From inside the Fort measure approximately 3" (82.5mm) from the bottom of the End Wall. Pre-drill 2 holes
using a 1/8" (3.2mm) drill bit. Install 2 (S4) #8 x 3" Wood Screws through the (9273) Back Wall Assembly and into
the (9195) Ladder Brace as shown in (fig. 11.5).
Fig. 11.4
End Wall
9273
Wood Parts
1 x Ladder Brace 31.8 x 76.2 x 482.6mm
9195
9527
S11
9195
Hardware
2 x #8 x 2" Wood Screw
S11
2 x #8 x 3" Wood Screw
S4
Fig. 11.5
View From Bottom
9527
#8 x 3" Wood Screw
#8 x 3" Wood Screw
#8 x 2-1/4" Wood Screw
33
S4
predrill 2 holes
82.55
9273
9195
S11
view from bottom
predrill 2 holes
view from bottom
predrill 2 holes