Advertisement
Step 13: Attach Hand Grips
A: On the Rock Wall measure 2"(50.8mm) up from the top of the Vertical Rock Boards and center 1 Hand
Grip on the post. Pre-drill with a 1/8"(3.2mm) drill bit and attach using 2 (LS1) ¼ x 1-1/2" Lag Screw (with flat
washers). (fig. 13.1 and 13.2)
B: On the Back Wall of the assembly and to the center, repeat step A to attach second hand grip. (fig. 13.2 and
13.3)
Fig. 13.1
Fig. 15.3
Hand
Grip
Rock Wall
Hand
Grip
4 x
LS1
Fig. 13.2
2"
(50.8mm)
Hardware
1/4 x 1-1/2" Lag Screw
(with flat washer)
36
Flat
9272
Washer
LS1
Hand
Grip
LS1
Flat
Washer
Other Parts
2 x Hand Grip
Advertisement
