KidKraft BLOOMFIELD F29180 Installation And Operating Instructions Manual page 17

Step 2: Frame Assembly
Part 1
A: With a helper, unfold (9273) Back Wall Assembly and stand it in the upright position. Check to make sure
the assembly is square then pre-drill holes using a 3/16" drill bit and install 4 (WL5) 1/4 x 2- 1/2" Wafer Lags.
(fig. 2.1)
B: Repeat step A to install 4 (WL5) 1/4 x 2- 1/2" Wafer Lags into (9272) Front Panel Assembly. (fig. 2.2)
Fig. 2.1
WL5
Wood Parts
1 x Front Wall Assembly 63.5 x 1098.6 x 2209.8mm
9272
1 x Back Wall Assembly 63.5 x 1098.6 x 2209.8mm
9273
9273
Hardware
8 x 1/4 x 2-1/2" Wafer Lag
WL5
17
Fig. 2.2
WL5
9272