Advertisement
Step 12: Vertical Wall Assembly
Part 1
A: On the lower left hand side of the Front Wall place 4 (2851) Vertical Rock Boards tight together making sure
that they are centered in the opening and flush to the top. It is important to note hole orientation, every other
board needs to be flipped. Attach using 4 (S2) #8 x 1-1/2" Wood Screws per board. (fig. 12.1 and 12.2)
B: From inside the fort have a helper hold the (2847) Rock Support horizontally so that it lines up with the pre-
drilled holes along the center of the Vertical Rock Boards. Attach from the outside using 1 (S2) #8 x 1-1/2" Wood
Screw per board. (fig. 12.3, 12.4 and 12.5)
Fig. 12.1
Fig. 12.3
Inside View
inside view
inside view
Wood Parts
inside view
inside view
4 x
Vertical Rock Board 15.9 x 114.3 x 1193.8mm
2851
1 x
Rock Support 25.4 x 63.5 x 419.1mm
2847
Note orientation,
2851
every other
board is flipped
2847
One person holds
the Rock Support
on the inside while
it gets screwed
from the outside
one person holds the Rock Support on the inside while
it gets screwed from the outside.
one person holds the Rock Support on the inside while
inside view
4x #8 x 1-1/2" WS
it gets screwed from the outside.
one person holds the Rock Support on the inside while
4x #8 x 1-1/2" WS
it gets screwed from the outside.
4x #8 x 1-1/2" WS
4X Vert Rock Board (note
orientation, every other
board is flipped)
16X #8 x 1-1/2" WS
flush to top of
openning
cetre horizontally over
the openning
Fig. 12.4
Outside View
one person holds the Rock Support on the inside while
it gets screwed from the outside.
4x #8 x 1-1/2" WS
one person holds the Rock Support on the inside while
it gets screwed from the outside.
Hardware
4x #8 x 1-1/2" WS
20 x
#8 x 1-1/2" Wood Screw
S2
34
4X Vert Rock Board (note
orientation, every other
board is flipped)
16X #8 x 1-1/2" WS
flush to top of
openning
4X Vert Rock Board (note
orientation, every other
4X Vert Rock Board (note
board is flipped)
cetre horizontally over
orientation, every other
16X #8 x 1-1/2" WS
4X Vert Rock Board (note
the openning
board is flipped)
Fig. 12.2
orientation, every other
16X #8 x 1-1/2" WS
board is flipped)
flush to top of
16X #8 x 1-1/2" WS
openning
flush to top of
openning
flush to top of
openning
cetre horizontally over
the openning
cetre horizontally over
the openning
cetre horizontally over
the openning
Center horizontally
over the opening
Fig. 12.5
Flush to top
of opening
S2
x 4 per board
S2
x 4
Advertisement
