KidKraft BLOOMFIELD F29180 Installation And Operating Instructions Manual page 20

Step 3: Floor Assembly
Part 1
A: From inside of the assembly centre (2608) Floor Joist over the pilot holes in both Panel Floors in the Swing
and End Walls, measure 5/8" (15.9 mm) down from the top of boards then attach (2608) Floor Joist to each board
using the left and centre holes with 2 (S4) #8 x 3" Wood Screws per board. (fig. 3.1, 3.2, 3.3 and 3.4)
Fig. 3.1
Fig. 3.2
2608
9273
Wood Parts
1 x Floor Joist 31.8 x 76.2 x 1035.1mm
2608
Swing Wall
9273
5/8" (15.9 mm)
Fig. 3.3
End Wall
4 x
End Wall
Notice holes used
S4
Hardware
#8 x 3" Wood Screw
S4
20
2608
9272
Fig. 3.4
Swing Wall
S4