Advertisement
Step 11: Access Ladder Assembly
Part 2
D: On the Back Wall of the assembly and to the right, place Ladder Assembly against (9273) as shown in fig.
11.2 making sure that it is flush. Pre-drill holes with a 1/8"(3.2mm) drill bit then attach using 2 (LS3) 1/4 x 3" Lag
Screw (with flat washer). (fig. 11.3)
Fig. 11.2
Flush
9273
LS3
Hardware
2 x
1/4 x 3" Lag Screw (with flat washer)
LS3
32
Fig. 11.3
Flat Washer
Advertisement
